Related Manuals for LG V-KC403HT
Summary of Contents for LG V-KC403HT
- Page 1 OWNER'S MANUAL V-KC403HT New Type Cyclone vacuum cleaner P/No.: 3828FI2873Q 3828Fi2873Q...
-
Page 2: Table Of Contents
Table of contents Information for Your Safety..................3 How to Use.........................4 Assembling Cleaner ......................4 Using the Cleaning head and Accessory Nozzles..............6 Emptying the Dust Tank ......................8 Vacuum Cleaner Operation ....................9 Cleaning the Dust Tank ....................10~11 Cleaning the Air Filter ......................12 Cleaning the Exhaust Filter ....................13 What to do if your Vacuum Cleaner does not work ..........14 What to do when suction performance decreases ..........14 3828Fi2873Q... -
Page 3: Information For Your Safety
Do not use the vacuum cleaner If the power cord is damaged or faulty. If the power cord is damaged, it must be replaced by an approved LG Electronics Service Agent to avoid a hazard. Do not unplug by pulling on cord. -
Page 4: How To Use
How to Use Assembling Cleaner Fit the large cleaning head onto the end of the pipe. Spring latch Telescopic pipe Large cleaning head Telescopic pipe Push the head onto the • Press the spring latch to release. telescopic pipe. • Pull out the pipe to the desired length. •... - Page 5 Head Button Flexible Hose Attachment Point Connecting the hose to the cleaner Push the head end of the flexible hose into the attachment point on the vacuum cleaner. To remove the flexible hose from the body, press on the button located on the head, then pull the head out of the vacuum cleaner.
-
Page 6: Using The Cleaning Head And Accessory Nozzles
How to Use Using the Cleaning head and Accessory Nozzles Upholstery nozzle Dusting brush Crevice tool Upholstery Nozzle Dusting Brush Crevice Tool Upholstery Nozzle is for Dusting Brush is for Crevice Tool is for vacuuming upholstery, vacuuming picture frames, vacuuming in those mattresses, etc. - Page 7 • Cleaning carpet and floor nozzle Pedal Carpet Floor Carpet and floor nozzle • Dual Cleaning Head Equipped with • Open the cover by pulling the hook. a pedal that allows you to adjust its position according to the type of floor. •...
-
Page 8: Emptying The Dust Tank
How to Use Emptying the Dust Tank PUSH Dust drop Tank handle Pull out Tank handle Carrier handle Dust Tank Tank Separation Lever The dust tank needs emptying when LED is turned to red. CAUTION • Turn off the vacuum cleaner and unplug it. •... -
Page 9: Vacuum Cleaner Operation
How to Use Vacuum Cleaner Operation Cord reel button Suction control switch POWER CONTROL FLOOR CARPET SOFA CURTAIN Plug How to Plug in and Use Adjusting the Suction power Park System • Adjust the suction level by using • Pull out the power cord to •... -
Page 10: Cleaning The Dust Tank
How to Use Cleaning the Dust Tank Pull out • Check the dust tank is full by the position indicated as WARNING! “MAX” in the container. • Press the lever of tank handle and pull the dust tank out. The cycle of the cleaning. •... - Page 11 How to Use Cleaning the Dust Tank Cover deco Cap dust CLICK! Push in • Empty dust by pressing the dust empty button as figure. • Remove the COVER DECO by rotating it counter-clockwise. • Wash the dust tank. • Dry it in shade until the moisture is fully removed. •...
-
Page 12: Cleaning The Air Filter
How to Use Cleaning the Air Filter(Pre- Filter) Micro Filter Sponge Filter Filter Cover The dust filter is located below the filter cover as in above figure. WARNING! If the LED is lighted up when the dust tank is not full, firstly Gently rinse both parts separately under a cold running clean the air filter. -
Page 13: Cleaning The Exhaust Filter
How to Use Cleaning the Exhaust Filter White side White side White side Filter cover • The exhaust filter is a permanent washable HEPA filter. WARNING! • To clean the exhaust filter, remove the filter cover on the body by rotating the filter cover counter clockwise. The cycle of the cleaning. -
Page 14: What To Do If Your Vacuum Cleaner Does Not Work
What to do if your vacuum cleaner does not work Check that the vacuum cleaner is plugged in correctly and that the electrical socket is working What to do when suction performance decreases • Turn off the vacuum cleaner and unplug it. •...