Sony VPH-G70Q Operating Instructions Manual page 15

Remote Control/Control Panel
The locations and functions of the keys on the remote
control are the same as those on the control panel of
the projector. (Only the remote control is equipped
with the transmission indicator and the COMMAND
ON/OFF switch.)
The remote control may be used as a wired or wireless
remote control.
@£
@™
@¡
@º
!ª
!•
!¶
!§
!∞
1 LIGHT button
Illuminates the key indicators.
The key indicators turn off if you press the LIGHT
button again.
If you do not press any key for more than 30 seconds,
the indicators also turn off automatically.
If the COMMAND 6 switch on the remote control is
set to OFF, only the COMMAND switch is
illuminated.
When the remote control is connected to the
CONTROL S IN/PLUG IN POWER jack of the
projector via the remote control cable, the power is
supplied to the remote control from the projector.
2 3
1 4 5
LIGHT
STATUS
MUTING COMMAND
PIC AUDIO OFF ON OFF ON
LCD LENS CONTROL RGB CENT
NORMAL ZOOM SHIFT FOCUS SIZE
PATTERN SHIFT
INPUT SELECT
VIDEO SELECT BLKG RESET
VIDEO/S VIDEO
A B C D
SWITCHER/INDEX
1
2 3 4
SHARP
5 6 7 8
SWITCHER
INDEX
9 0(ALL) SECOND
Note
The VOLUME +/– !¢, INPUT SELECT, C and D !¶,
AUDIO MUTING @¡ and LCD LENS CONTROL @™ keys
do not function with this projector.
6 7
8 9
POWER
OFF ON
R MEMORY MENU
B
ENTER
PICTURE CONTROL
BRIGHT CONTR POSITION
HUE COLOR VOLUME
2 Transmission indicator (only for the remote
control)
Lights each time you press a key. If it does not light,
replace the batteries with new ones.
3 STATUS ON/OFF key
Press OFF to eliminate the on-screen display.
Press ON to restore the on-screen display.
Note
The menus and warning messages appear even if the OFF
key is pressed.
!º
!¡
!™
!£
!¢
15