Instruction Manual
IMPORTANT: Please read this instruction carefully before assembly and save these
instruction for future use.
Fig. 1
Assembly:
Make sure to place the pot on a level, hard, flat surface
against the wall before assembling the tree.
1. Insert tree into the pot as shown in (Fig. 1).
2. Manually pull down each branch on the tree from the tree
trunk.
3. Shape the branches. Shift branches to fill any gaps, lightly
upsweep all branch tips for a uniform look.
4. Open the lid of the battery box by releasing the locks. Insert 4
AA batteries* into the compartment, making sure that the
batteries are in the correct orientation. Close the lid with the
locks.
5. Press the button on the battery box once for timer mode,
twice to turn the lights constantly on, and a third time to turn
the lights off or reset the timer. The built-in timer mode causes
the lights to turn on and off in a cycle: on for 6 hours then off for
18. The user should initially turn on the lights at a specific time of
their choice, and then the lights will turn on every day at
approximately the same time.
6. Replace batteries when the lights become dim. Remove
batteries from unit when it is not used.
* Use 1.5V AA batteries or equivalent. Batteries not included.
SAVE THESE INSTRUCTIONS
P. 1
Sku# 1001317352 (INSTORE SKU)
1001290282 (DOTCOM SKU)
Model: BOWOTHD173GN
MADE IN CHINA
Need help?
Do you have a question about the BOWOTHD173GN and is the answer not in the manual?
Questions and answers