Battery Replacement - Zeon CE4555 Instructions Manual

SNOOZE / LIGHT touch button
Tap to turn on the backlight for 10 seconds.
Tap to stop the alarm and activate the 5-minute snooze function.
Setting the time
1. Press and hold the setting button for 3 seconds to enter
manual time setting mode, three letters of the language will
flash.
2. Press + / - button to change language setting from English,
French, Italian, Dutch & German.
3. Once set press setting button to move to next setting,
12/24-hour model will flash.
4. Press + / - button to change 12/24-hour setting.
5. Follow the above steps to complete the remaining setting in
following sequence YEAR, DATE/MONTH mode, MONTH,
DATE, HOUR, MINUTES, TEMPERATURE DISPLAY
6. Upon completing the last setting press setting button to
return to normal time display.
Note: During setting if no button is pressed for 20 seconds the
display will automatically exit the setting mode and will return to
normal time display.
Setting the alarm
1. Press and hold the bell icon button for 3 seconds to enter the
alarm setting mode, 1-5 (represent weekdays) along with hour
digit will flash.
2. Press + / - button to change the hour digits.
3. Once set press the bell icon to move to minute setting.
4. Press + / - button to change the minute digits.
5. Follow the above steps to complete setting the weekend
alarm, 6-7 (represents weekend) will flash.
6. Upon completing the last setting press bell icon button to
return to normal time display.
Note: During setting if no button is pressed for 20 seconds the
display will automatically exit the setting mode and will return to
normal time display.
Alarm activation / deactivation
1. Press the bell icon once to display the weekday alarm time,
1-5 (represent weekdays) will flash.
2. Press +/- button to activate or deactivate the alarm, the bell
icon will be shown when alarm is activated.
3. Press the bell icon twice to display the weekend alarm time,
6-7 (represent weekends) will flash.
4. Press +/- button to activate or deactivate the alarm, the bell
icon will be shown when alarm is activated.
Note: During setting if no button is pressed for 5 seconds the
display will automatically exit the setting mode and will return to
normal time display.
The display will only show the bell icon if set alarm time is in
accordance with current day, i.e if the alarm is set for weekends
only then the bell icon will not be shown on weekdays.
Using the snooze function
1. Tap the SNOOZE / LIGHT touch button to stop the alarm and
activate the snooze function. When the snooze function is
activated, the snooze icon will flash.
2. To completely disable the alarm and snooze function, press
the alarm button once.
Note: When the snooze function is activated, the alarm will
automatically start again a er 5 minutes. The snooze function
will not stop unless the ALARM ON / OFF SLIDER is shi ed
down.

Battery replacement

When the LCD becomes dim or backlight illumination becomes
weak which usually is a sign to replace with a new battery,
recommend replacing with a good branded alkaline battery.
Guarantee & Service
12 months guarantee against material and workmanship defects.
The guarantee is valid in those countries where the alarm clock is
officially being sold.
Broken or cracked lens screen is not covered under the
Guarantee.
For customer service please contact:
The Service Centre
Unit 1 Phoenix Park
Apsley Way
London
NW2 7LN
+44 (0)208 208 1833
WARNING! This product is covered by the Waste Electrical and
Electronic Equipment (WEEE) directive. It should not be discard-
ed with normal household waste but taken to your local collec-
tion centre for recycling.
This product conforms to the EMC requirements as per council
directive 2014/30/EU.