Cooling Air Inlet Cleaning; Humidity Sensor; Door Cleaning - Sharp KD-HT9JP-G Operation Manual

Maintenance of clothes dryer
Clean heat exchanger
• The surface of the heat exchanger is sharp, do not clean directly by hand.
Please wear protective gloves.
• Exerting pressure on the heat exchanger causes the fins to deform.
• Please do not sprinkle water directly to clean up.

Cooling air inlet cleaning

Humidity sensor

In order to reduce drying time and save energy, please clean up before and after use.

Door Cleaning

• Do not remove rubber from the door.
1. If dust accumulates at the air inlet on the front of the
product, clean with a wet cloth.
• Dust accumulates and flows into the product, which
may cause in abnormal operation or fire, so please
clean it up in time.
1. Clean the sensor surface with a soft cloth.
• To ensure good use effect, periodically clean the
sensor surfaces on time.
• Dust buildup on the sensor interferes with the opera-
tion of drying, resulting in increased drying time.
1. Dust or fluff may accumulate inside the door. Please
clean with a soft cloth and brush.
20