Advertisement
13. Read the % duty cycle in the display.
14. Press and hold the MODE button to return to current
measurement.
15. Press EXIT for 2 seconds into the function of AC+DC. Test DC
and AC True Rms.
RESISTANCE MEASUREMENTS
WARNING: To avoid electric shock, disconnect power to the unit
under test and discharge all capacitors before taking any
resistance measurements. Remove the batteries and unplug the
line cords.
1. Set the function switch to the green
Ω CAP
2. Insert the black test lead banana plug
into the negative COM jack.
Insert the red test lead banana plug into
the positive Ω jack.
3. Press the MODE button to indicate
"Ω" on the display.
4. Touch the test probe tips across the
circuit or part under test. It is best to
disconnect one side of the part under
test so the rest of the circuit will not
interfere with the resistance reading.
5. Read the resistance in the display.
position.
Advertisement
