Table of Contents
Advertisement
7. When you see this screen, select a zoom rate (display size), and
then press
.
Enter
8. When you see the message
and press
Yes
Enter
not use the projector or other sources (computer, video, etc.)
while the logo is being saved. When you see the message
, press
Completed
9. To display the logo as the background screen when you press the
button or when no image signal is available, select the
A/V Mute
menu and press
Extended
, and
Background
and press
Logo
Enter
10. When you're finished, press
Setting a Password
1. Press the
button on the remote control for about five
Freeze
seconds until you see the Password Protect menu:
2. Select
and press
Password
Save image as user's logo?
. Saving the logo takes a few moments. Do
.
Esc
. Then select
Enter
and press
. Select
Logo
Enter
.
to exit the menus.
Menu
.
Enter
, select
,
Display
Display
and
A/V Mute
Fine-tuning the Projector
note
The default setting for the
option
Startup Screen
menu is
. If the
On
Startup
is set to
, the
Screen
Off
logo will not display at
startup.
If the User's Logo Protect
function has been set to
On
the
Display Background
setting cannot be changed.
You need to turn the protect
function off first. See
page 66 for details.
Once you've saved a user's
logo, you cannot reset the
logo setting to its factory
default (no logo).
note
If a password has already
been set, you see the
Password Protect Release
screen. See "Starting the
Projector with a Password"
on page 67.
65
,
Advertisement
Table of Contents
