Fine-tuning the Projector
50
Using the Projector's Menu System
The projector menus let you adjust and customize the projector
features:
The
menu lets you modify the colors of the projected
■
Image
image and fine-tune brightness, contrast, and sharpness. See
page 52.
■
The
menu lets you make adjustments to the input signal.
Signal
You can select your input source, change the image position and
aspect ratio, and adjust tracking and sync for computer images.
See page 54.
The
menu lets you customize the way you use the
■
Settings
projector. It allows you to adjust the volume and keystone
correction, set lamp brightness to high or low, control use of the
remote control receivers, project a test pattern for adjustments,
and disable buttons on the projector while you are projecting. See
page 56.
The
menu lets you customize the way you set up the
■
Extended
projector. Among the options, you can select the menu language,
set rear or ceiling projection, turn closed captions on or off, and
record a custom image or logo to be displayed as the startup
screen or whenever you press the
control. See page 58 and page 62.
The
menu lets you select your network settings and
■
Network
optional passwords for monitoring the projector over a network
or over the web. See page 60.
The
menu provides information about lamp status and
■
Info
computer or video settings. See page 61.
The
menu lets you restore the projector's factory default
■
Reset
settings. See page 69.
button on the remote
A/V Mute