Table of Contents
Advertisement
Zooming Your Image
Follow these steps to zoom in on a portion of the image:
1. Press the
E-Zoom +
You see a crosshair indicating the center of the zoom-in area.
2. Use the four "arrow" buttons on the remote control to position
the crosshair in the area you want to enlarge.
3. Continue pressing the
area up to 4 times.
4. While the image is enlarged, you can:
Use the arrow buttons to pan about.
■
Press the
■
E-Zoom –
5. When you're done, press the
size.
Changing the Image's Aspect Ratio
If you're projecting a widescreen format image, you can use the
button on the remote control to change the aspect (width to
Aspect
height) ratio from
.
4:3
You can change video images to
or
(to accommodate subtitles or supertitles).
(Up)
16:9 (Down)
You can change computer images to
Normal
Press the
button again to cycle through the available options.
Aspect
You can also change the aspect ratio using the projector's Signal
menu. See page 54 for details.
button on the remote control.
button to enlarge the selected
E-Zoom +
button to zoom out.
button to return to the original
E
SC
(widescreen format), or
16:9
(widescreen format) or
16:9
Arrow
buttons
E-Zoom
buttons
16:9
Using the Remote Control
Aspect
button
47
Advertisement
Table of Contents
