Table of Contents
Advertisement
Clean
Cleaningtheshaver
1. Disconnect the power cord
from the shaver.
. Apply some hand soap and
some water to the outer foil.
. Turn the shaver on.
4. Turn the shaver off after 10‑0
seconds.
. Remove the outer foil section
and turn the shaver on.
. Clean the shaver and the
outer foil section with running
water.
. Wipe off any drops of water
with a dry cloth.
10
ES-RL40_CH.indb
10
8. Dry the outer foil section and
the shaver completely.
. Attach the outer foil section to
the shaver.
The mark on the
3
left means suitable
for cleaning under
an open water tap.
Warning
Disconnectthepowercordfromtheshaverbefore
5
cleaningitinwatertopreventelectricshock.
Replacingthesystemouterfoilandtheinnerblades
6
►
Replacingthesystemouterfoil
1. Press the system outer foil
release buttons and lift the
system outer foil upwards as
illustrated.
. Insert the system outer foil by
pushing it downwards until it
clicks.
8
system outer foil once every year
inner blade
once every two years
1
2010/01/05
20:10:22
Advertisement
Table of Contents
