udir/c UDI010 User Manual page 3

① Twist to left or right to open the outer cover lock.
③ According to the mark on the surface of the inner cover, unlock the lock and take out the inner
cover upward.
④ Put the Li-po battery into the boat battery holder.
the power line of the battery puts on the side of the
hull, push the battery to the end and stick to it.
⑥ Cover the inside and outside of the cabin and lock tightly.
Align the head cover with the bottom hole of the boat and install it in the right place.
Boat battery installation method
Cabin Inner
Cover
Head Cover Installation
② open up the cabin cover.
Battery output port
⑤ Properly connected the hull input port
to the output port of the Boat battery.
03
Hull input port