Advertisement
88 9001 004C
Drawer (P)
Unit Part List
P1.
Front Part
1 pc.
P2.
Back Part
1 pc.
P3
(Fig)1
P2
(Fig) 2
Slide the Plywood Base (P5) into the grooves
on side parts. Be sure to push the Base all the
way forward so it meets the Front Part.
P3
P2
(Fig)3
P3.
Side Part
1 pc.
P1
P4
P1
(Fig) 3
Insert the remaining
P5
into the pre-drilled holes at the Base,
P4
then tighten up all screws.
(Fig) 4
Assemble the Pull Handle
to the Front Part
Machine Screw.
* If you are missing any of these
parts, please contact our DMI
Customer Service Department
at 1-877-831-0319 or fax us at
1-800-755-2878.
HARDWARE LIST
P4.
Side Part
1 pc.
Pull Handle
1 pc.
P5.
Base
Machine Screw
1 pc.
for Pull Handle
2 pc.
Assembly Instructions
(Fig) 1
Assemble the Front Part (P1), Back Part
(P2) and Side Part (P3) and (P4).
Using a
Phillips screw driver
screw into the pre-drilled holes at the
side parts, tighten half way.
P3
(Fig)2
P5
½"
screws (6 pcs.)
with
Wood Screw
(for Base)
6 pcs.(+1 extra)
Wood Screw
(for Side Part)
8 pcs.(+1 extra)
, insert 1
P1
P4
(Fig)4
"
Advertisement
