Advertisement
IMPORTANT
Do not tighten up all the screws until each part is properly assembled.
You should keep Hex Wrench in the safe place as you may need to
tighten up the Head Cap Bolts in the future.
STEP 1
Attach four Casters to
the underneath of the Base (C).
C
Locking Caster
D
Assembly Instructions 2/4
Wood Screw
STEP 2
Attach the Side Panel (B) to the
Base (C).
Tighten up the Head Cap Bolts.
Attach the Back Piece (D) on the Base rear.
B
Head Cap Bolt
C
Tighten Head
Cap Bolt by
Hex Wrench.
Locking Caster
Advertisement
