Table of Contents
Advertisement
(Step 2) Attach the LED Array
1) Attach the LED Array to the round hole on Cover Bottom embo.
2) Press the LED Array on the surface of Cover Bottom.
3) Connect the CNT to the LED Array.
* Finish the Attached LED Array (9ea)
5. The Guide of Module assemble
(1) Assemble the Reflector Sheet(2ea_Left/Right) .
* Assemble according to Guide embo.
* Assemble the reflector sheet bellow the lens with your fingers.
* In the case of corner and center, place the side marked UP on top.
NG
OK
- 26 -
Copyright ©
LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Advertisement
Table of Contents
