Table of Contents
Advertisement
(3) Removal of DPS ASSY
- Rotate the Support DP counterclockwise 45 degrees to align it to the assembly hole and lift it upwards to disassemble. (Total
28ea)
(4) Disaessmble the Reflector Sheet. (2ea_Left/Right)
- As the reflector hole is fixed to the lens, disassemble the reflector by release the the fixation of lens from the end on the right.
a fixed part
4. The Guide of LED Array disassemble
(1) LED Array Disassemble
Connector(CNT)
(1) Disassemle the CNT form LED Array.
(2) Separate the LED Array from Cover Bottom.
(3) Remove the double tape form Cover Bottom.
* After removing LED array once, You should not use it again.
(2) LED Array Assemble
(Step 1) Attach the Double Tape
1) Attach the double tape to the round hole on Cover Bottom embo.
2) Remove the protect film of Double Tape with taking off the handler.
a fixed part
double tape
handler
- 25 -
Copyright ©
LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Pull to the
upside
Advertisement
Table of Contents
