Table of Contents
Advertisement
3-4
Installing and Removing the GPU Heat Sink
• Thoroughly unlock the four screws before lifting and removing the heatsink.
• When installing the heatsink to CPU,use T20-Lobe driver to tighten 4 captive nuts in sequence
as 1-4.
• The screw tightening torque: 3.5 +/- 0.5 kgf-cm
Follow these instructions to remove the GPU card tray:
1.
To install the heatsink, align the heatsink to the GPU socket using the guide pins and make sure the
gold triangle is in the correct orientation. Then place the heatsink onto the top of the GPU socket.
2.
Secure the heatsink by tightening the screws in sequential order (1g2g3g4).
3.
To remove the heatsink, gently pull up the heatsink strap.
3
System Hardware Installation
- 30 -
2
3
2
1
4
Advertisement
Table of Contents
