Advertisement
EN
Model
Torque Nm
Speed RPM
Min
Max
MITO15
0,35-1,5
450
850
WARNING: To reduce the risk of injury, before using or servicing screwdriver, read
and understand the following information as well as separately provided safety
instructions (item code: 0MS000). The features and descriptions of our products are
subject to change without prior notice.
DECLARATION OF USE
Screwdriver suitable for industrial environment only. It shall be used for tightening.
No other use will be permitted. For professional use only.
DATA
Noise level: < 70 dB(A)
Vibration level: < 2.5 m/s²
Declaration of noise and vibration emission
These declared values were obtained by laboratory type testing in compliance with
the stated standards and are not adequate for use in risk assessments. Values measured
in individual work places may be higher than the declared values. The actual exposure
values and risk of harm experienced by an individual user are unique and depend upon
the way the user works, the work piece and the workstation design, as well as upon
the exposure time and the physical condition of the user. We, KOLVER, cannot be
held liable for the consequences of using the declared values, instead of values
reflecting the actual exposure, in an individual risk assessment in a work place
situation over which we have no control.
OPERATING MODE
The screwdriver can be manual or used as fixed spindle on an automatic machine.
IMPORTANT: Continuous use over 80% of torque range is not recommend!
Vers. 190521
Advertisement
