Advertisement
Service Rules
1. Only use genuine Toro parts and lubrication products.
2. Always install new gaskets, O-rings and seals when assembling engine.
3. Always torque fasteners to specification and in sequence.
4. Always lubricate friction components with clean engine oil or engine assembly lube
when assembling engine.
Engine Model / Serial Number Location
2010-2011 - The engine model and serial number are stamped into the crankcase near the electric starter
mounting position on the side of the engine towards the front of machine (shown below).
2012 - The engine model and serial number are stamped into the crankcase near the rear of the machine.
Engine Model and
Serial Numbers
Engine Model
XXX-XXXX XXXXXXXXXXX
Serial Number
3
1
Advertisement
Chapters
