Table of Contents
Advertisement
Selecting Gentle tumble
Delicate fabrics (with the symbol on
the care label, e.g. acrylic garments)
are dried at a lower temperature and
with a longer programme duration.
Touch the Gentle tumble sensor. It
will light up brightly.
- Gentle tumble can be selected with
the following programmes:
– Cottons
– Minimum iron
– Shirts
– Warm air/DryFresh
- Gentle tumble is always activated/
cannot be deselected with Delicates.
Starting a programme
Touch the flashing Start/Add laundry
sensor.
The Start/Add laundry sensor lights up.
Programme sequence
- If Delay start has been selected, the
Delay start time will start to count
down first.
- The programme starts.
- The PerfectDry indicator will only
flash/light up with programmes with
selectable drying levels (see also
"Operating the tumble dryer").
- The dryer measures the residual
moisture of the laundry and calculates
the required programme duration.
If a small load or dry laundry is placed
in the dryer, it is dried/aired for a
preset duration. In this case the
PerfectDry indicator does not light up
at the end of the programme.
3. Selecting a programme and starting it
Laundry items and fabrics can wear
out unnecessarily.
Avoid over-drying laundry and
garments.
- Before the programme finishes, the
laundry is cooled.
Energy savings
After 10 minutes, the indicators dim.
The Start/Add laundry sensor flashes
slowly.
Touch the Start/Add laundry sensor
to switch the indicators on again (this
does not have any effect on a running
programme).
Adding laundry
You can add laundry after the
programme has started.
Follow the instructions in the sections
"Changing the programme sequence"
and "Adding or removing laundry".
31
Advertisement
Table of Contents
