Beko DIN36430 User Manual page 31

Floor illumination
Warning to show that machine is in
washing phase
(depends on the model)
Your machine reflects a light to the floor
during the washing process. This light turns
off after the washing process is complete.
Floor illumination is activated
automatically when the washing
programme starts and remains lit until
the end of the programme.
Floor illumination cannot be cancelled
by the user.
Inner Illumination
(depends on the model)
Some models have interior lighting to
illuminate the interior when the door is
opened.
Changing the interior lighting
setting
1. After turning on your machine, press
and hold the Time Delay and Start /
Pause / Cancel key for 3 seconds.
2. Press the Time Delay key to switch the
delay indicator to position 9.
3. You can press the function keys to
turn on and off the inner illumination.
The inner illumination is switched to
off position if the 1st programme LED
is on, and to the on position if the 2nd
programme LED is on.
4. Press the On/Off key to exit the
settings menu. Your setting will be
saved automatically.
SelfDry
(Depends on the Model)
Thanks to the "SelfDry" feature on your
machine, the drying effectiveness of your
machine is improved and power is saved.
There are two options, namely "OFF" and
"ON".
You may use sub-menu settings to change
"SelfDry" settings.
When you activate this function, the door
of your machine is opened automatically at
the end of the washing cycle.
Auto door opening feature opens the
doors at the end of the washing cycle
thanks to the "door opening shafts".
This process takes about 2 minutes.
Do not force to close the door if the
power is interrupted while the shafts
are moving out. Operation shall be
completed and shafts shall be retracted
when the power is restored.
SelfDry function may cause changes to
the cycle time.
Changing SelfDry Settings
1. Press the Delay and Start/Pause/
Cancel key simultaneously for 3
seconds after turning on your machine.
2. Press the Delay key until 3 hours delay
indicator is illuminated in the menu.
Using the function keys, set the SelfDry
function on or off. Function is off the
first cycle indicator is illuminated, and
it is turned on when the second cycle
indicator is illuminated.
3. Turn off your machine with the On/Off
key to save the setting.
EverClean Filter
(depends on the model)
With this function, your micro filter will be
cleaned by a special system at the end of
washing cycle and it is made ready for use
for the next usage of the machine. This
cleaning process increases the cleaning
period of the micro filter from 2 weeks to
3 months and thus boosts the washing
performance. Employing this function in
every washing cycle is recommended in
order to get the most out of it.
31/EN