Table of Contents
Advertisement
Super Rinse Function
(Depends on model)
Depending on the type of the detergent
used, if a detergent dissolving issue is
encountered it will remove the resulting
stains from the dishes and enables the
optimum rinsing performance.
SteamGloss Function
(Depends on model)
It provides superior drying performance.
Fast+ Function
(Depends on model)
It shortens the time of the washing cycle
selected and decreases water consumption
by enabling washing under higher pressure.
Tablet detergent function
(depends on model)
Allows to obtain a better drying
performance from the multi-purpose
detergents called as all in one detergents
such as 2in1, 3in1, 4in1, 5in1 and etc.,
depending on the hardness level of the tap
water.
If you have used the Tablet features
during the last washing programme
you used, Tablet function will remain
active in the next washing programme
you will select.
Tablet Detergent function may cause
change in the programme duration.
AquaIntense Function
in the right side of the lower basket. It will
give better results to place the most soiled
dish to the right front side.
Do not try to remove the AquaIntense
impeller!
30/EN
(depends on model)
AquaIntense impeller
located under the
lower impeller helps
washing your heavily
soiled dishes places
TrayWash Function
(depends on the model)
Select Intensive 70°C programme and
press function key to run this function.
AquaActive Function
(Depends on model)
This function operates the lower impeller
with a higher pressure and higher speed to
enable a better washing for dishes such as
pans and trays with stubborn, dried soiling.
IonGuard function
(depends on the model)
"IonGuard function" is enabled at regular
intervals and prevents the formation of
bad odours due to putrefaction. If this
function is selected, it will be activated
while the product is turned off and the
IonGuard indicator on the panel will flash.
A ventilation noise can be heard, this
is normal. Until the function selection is
disabled, system is automatically activated
intermittently.
Changing Warning Sound Volume
1. After turning on your machine, press
and hold the Time Delay and Start /
Pause / Cancel keys respectively.
2. Using the Time Delay key, turn on 9
and 6 LEDs.
3. Adjust the volume with the function
keys.
If the 1st programme indicator is on, the
volume is off
If the 2nd programme indicator is on, the
volume is at medium level
If the 3rd programme indicator is on, the
volume is at high level.
4. Turn off the machine with the On/Off
key to save the changes.
Advertisement
Table of Contents
