Changing Values And Settings For A Cooking Program; Changing The Temperature And Core Temperature - Miele DGC 7840 Operating And Installation Instructions

Cleaning the steam oven
 Remove the water container and con-
densate container and empty them as
required.
 Turn the steam oven off.
appears after a cooking
Appliance rinsing
program involving steam.
 Follow the instructions on the display.
The rinsing process should be car-
ried out every time to flush any re-
maining food deposits out of the sys-
tem.
 Clean and dry the whole steam oven
as described in "Cleaning and care
for the steam oven".
 Leave the appliance door open until
the oven compartment is completely
dry.
Refilling the water
If water needs replenishing during the
cooking program, a tone will sound and
the display will prompt you to refill the
container with fresh water.
 Remove the water container and fill it
with fresh water.
 Push the water container into the ap-
pliance.
The cooking program will continue.
Changing values and settings
for a cooking program
Depending on the operating mode, as
soon as a cooking program is in
progress, you can change the values or
settings for this program.
Depending on the operating mode, you
can change the following settings:
-
Temperature
- Moisture
- Duration
-
Booster
- Preheat
-
Crisp function
Changing the temperature and core
temperature
Via Settings | Recommended tempera-
tures , you can permanently adjust the
recommended temperature to suit
your cooking preferences.
The  core temperature only ap-
pears if you are using the probe (see
"Roasting – Probe").
 Tap the temperature display.
 Change the temperature and the
 core temperature as required.
 Confirm with OK.
The cooking program will resume with
the new target temperatures.
Operation
67