Advertisement
6
C O N F I G U R A T I O N U T I L I T Y
O V E R V I E W
Aerocomm provides an easy to use Configuration utility to program and test the CL4490. The GUI based
software is compatible with Microsoft® Windows 95, 98, 2000, ME, NT, & XP. The CL4490 is a plug and play
device which requires minimal or no configuration.
For additional details regarding the radio's operation and advanced configuration commands, users may
refer to the AC4490 OEM module user's manual. The manual can be found on the Aerocomm Tools &
Literature CD or on our website http://www.aerocomm.com.
S O F T W A R E I N S T A L L A T I O N
Locate the OEM software folder on the Aerocomm Tools & Literature CD and install the development kit
software. To install the software, run Setup.exe and follow the installation prompts. During the
installation, the software will prompt the user to install the Aerocomm USB Driver. It is recommended that
the user installs the driver at the same time as the software.
The installer will notify the user when the software has successfully been installed. The user may be
prompted to reboot the PC to complete the installation.
Click OK to complete the installation. By default, the software is stored in the following location on the
Start Menu:
Start -> All Programs -> Aerocomm Wireless, Inc. -> AerocommOEM.exe
The software will attempt to open COM1 of the PC. If there is a conflict or the port does not exist, the
software will show the port as unavailable. This has occurred for one of the following reasons:
There is other software running that has control over the COM1 port. Locate this software and
10
shut it down while running "Aerocomm OEM.exe" software.
The PC either does not have a COM1 port or the port has been disabled.
11
6
1 - 8 0 0 - 4 9 2 - 2 3 2 0
w w w . a e r o c o m m . c o m
Advertisement
