Table of Contents
Advertisement
Operating the appliance
en
Cancel the programme
For programmes washing at high
temperatures:
Touch the A button.
1.
To cool down laundry: Select Rinse.
2.
Touch the A button.
3.
For programmes washing at low
temperatures:
Touch the A button.
1.
Select Spin.
2.
Touch the A button.
3.
For programmes in drying process:
Switch the appliance off.
1.
Switch the appliance on again.
2.
To cool down laundry: Select the
3.
MyTime +
Touch the A button.
4.
Programme end
End lights up on the Touch-Display and
A and Õ displays are off.
If you have selected 2, the water is only
drained after rinse process, no spin
cycle.
Notes
If Hot flashes in the display before
■
the drying programme ends, the
temperature in the drum is high. The
programme for cooling the drum
runs until the temperature in the
drum has dropped.
Wrinkle guard process starts after
■
drying process is finished to prevent
laundry getting wrinkle if you do not
take laundry out in time. The process
lasts about 30 minutes. ˜—à•, £©
and "Ÿš will be displayed alternately
on Touch-Display and Q symbol will
be displayed as the status symbol.
You can touch any area of Touch-
Display to terminate this process,
then the door will be released and
laundry can be taken out.
40
(Dry).
Removing laundry/switching
off the appliance
Press the # button till the indicator
1.
lamp turns off, release the button.
The appliance is switched off.
Open the door and remove the
2.
laundry.
Turn off the water tap.
3.
Not required for Aqua-Stop
Note:
models.
Notes
Do not leave any items of laundry in
■
the drum. They may shrink in the
next wash or discolour another item.
Remove any foreign objects from the
■
drum and the rubber seal – risk of
rusting.
Wipe the rubber seal dry.
■
Leave the door and detergent
■
drawer open so that any residual
water can evaporate.
Always wait until the programme
■
ends, as the appliance could still be
locked. Then switch the appliance
on and wait for it to unlock.
Advertisement
Table of Contents
