Page 1
USER MANUAL ELECTRIC DESIGNER RADIATOR WITH SMART APP HS10-600-0.6DGW VD4-1600-1.2BW VS4-1600-1WW HS10-600-0.6WW VD4-1600-1.2LGW VS4-1600-1DGW HS10-600-0.6LGW VD4-1600-1.2WW VS4-1600-1LGW HS10-600-0.6BW VD4-1600-1.2DGW VS4-1600-1BW HS17-600-1.2DGW VD6-1600-1.2DGW VS6-1600-1LGW HS17-600-1.2WW VD6-1600-1.2LGW VS6-1600-1WW HS17-600-1.2LGW VD6-1600-1.2WW VS6-1600-1DGW HS17-600-1.2BW VD6-1600-1.2BW VS6-1600-1BW HC18-400-1.2BW VSM6-1800-1.2LGW HC18-400-1.2WW VSM6-1800-1.2DGW HC26-400-1.2WW VSM6-1800-1.2WW HC26-400-1.2BW VSM6-1800-1.2BW Thank you for choosing electriQ Please read this user manual before using this heater and keep it safe for future reference.
CONTENTS SAFETY INSTRUCTIONS PARTS SUPPLIED INSTALLING WITHIN A BATHROOM INSTALLATION OF THE HEATING ELEMENT WALL MOUNTING OPERATION MODES OTHER FUNCTIONS ADDITIONAL SETTINGS THE WEEKLY TIMER DEFAULT TIMER PATTERN PROGRAMMING THE TIMER CONFIRMING THE TIME ADJUSTING THE TIMER PATTERN CONNECTING YOUR APPLIANCE TO WI-FI MODES AVAILABLE FOR SETUP REGISTER THE APP SETTING UP YOUR HOME WITHIN THE APP...
SAFETY INSTRUCTIONS IMPORTANT: Carefully read the instructions before operating the unit. • This appliance is for indoor use only. • Rating: This unit must be only connected to a 220-240 V / 50 Hz earthed outlet. • If you are in any doubt about the suitability of your electrical supply have it checked and, if necessary, modified by a qualified electrician.
storage. This is normal and will quickly disappear. • This appliance has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or any flammable liquids are used or stored. • Never locate this appliance where it may fall into a bathtub or otherwise become exposed to water.
INSTALLING WITHIN A BATHROOM If the appliance is to be fitted within a bathroom, a good understanding of the zoning within bathrooms is required to ensure the unit is mounted in a safe position. The appliance is rated as IPX4 and should be installed outside of Zones 0 -2. We would advise when the unit is fitted within a bathroom, the plug is removed from the unit, and a suitable fused spur is installed in accordance with BS 7671.
INSTALLATION OF THE HEATING ELEMENT IMPORTANT: Before drilling, ensure that no wires or pipelines are behind the wall to prevent damage. On the unit, you will find a sticker indicating the direction to insert the heating element. The heating element MUST be positioned at the base of the unit during operation.
WALL MOUNTING NOTE: Depending on your wall type alternative fixings may be required to secure the heater to your wall. If in any doubt advice should be sought from a competant person. Measure the distance between the two columns that you will be hanging your heater from on the top of the heater and the two ends on the bottom of the rail.
OPERATION POWER BUTTON: DISPLAY: Press once to turn the unit on. Displays the current Press again to put the unit in time, temperature and standby mode. mode. Press and hold for 10 seconds to restore the unit to the factory settings.
MODES Press the Mode button to change between the five different modes. The symbol on the display will indicate the currently selected mode: ICON MODE DESCRIPTION Use the DECREASE and INCREASE buttons to set the desired room temperature between 7°C and 30°C. When the desired temperature is COMFORT set the radiator will heat (to the set Radiator temperature) and will remain at that until the desired room temperature is reached, at which...
ADDITIONAL SETTINGS To Access the additional settings, press and hold the INCREASE button for 10 seconds while the unit is in standby. While within the additional settings use the INCREASE and DECREASE buttons to change their values, and the MODE button to move to the next setting. OPTION MODE DESCRIPTION...
THE WEEKLY TIMER To use the WEEKLY TIMER, the unit must be changed into WEEKLY TIMER mode using the MODE button. The weekly timer is split into 1 hour time slots, and for each timeslot the unit can be set to run in COMFORT MODE, ECO MODE or DEFROST MODE.
PROGRAMMING THE TIMER Although for ease of use, we do advise for the timer to be set up through the app, it is also possible to program the 7 day timer using the control panel on the unit. The weekly timer allows the operation for each day to be set independently.
ADJUSTING THE TIMER PATTERN When adjusting the timer, each day is adjusted separately. Once the current day and time have been confirmed as per the previous page, the unit will then be ready to adjust the timer. This will start at 00:00 on P1 (Monday). TIME (HOUR) For each hour, check the symbol that is showing for the operating mode:...
CONNECTING THE APPLIANCE TO WIFI DOWNLOAD THE APP TO YOUR PHONE Download the” TUYA SMART” app, from your chosen app store, using the QR codes below, or by searching for the app in your chosen store. ANDROID MODES AVAILABLE FOR SETUP The appliance has 2 different modes that can be used for connection, Bluetooth mode and Access Point (AP) mode.
REGISTER THE APP 1. Press on the register button Read the Privacy policy and 3. Enter your email address or at the bottom of the screen. press the Agree Button. phone number and press continue to register. 4. A verification code will be 5.
SETTING UP YOUR HOME WITHIN THE APP TUYA is designed so it can work with a large number of compatible smart devices within your home. It can also be set up to work with multiple devices within different houses as such during the setup process, the app requires that different areas are created and named to allow easy management of all your devices.
CONNECTING USING THE BLUETOOTH CONNECTION METHOD Before initiating the connection, make sure your mobile phone has Bluetooth enabled and that the unit is plugged in, with the WiFi turned on within the additional settings. Also ensure your phone is connected to the WiFi network you want to add the device to. (We advise turning mobile data off during setup) 1.
CONNECTING USING AP MODE (ALTERNATIVE METHOD) Before initiating the connection, make sure the unit is in standby mode, with the WiFi turned on within the additional settings. Also ensure your phone is connected to the WiFi network. (We advise turning mobile data off during setup). 2.
CONTROLLING YOUR APPLIANCE THROUGH THE APP THE HOME SCREEN Each device has its own entry on the home screen to allow the user to either quickly turn the unit on or off, or to enter the device screen to make other changes. Voice Control: Press to Add Device: Add a device give verbal instructions for...
DEVICE SCREEN The device screen is the main control screen for the heater, providing access to the controls to amend the functions and settings. Device Profile: Use to Device Name Back: Returns to the change the name of the Home Screen. heater.
PROGRAM DATA / WEEKLY TIMER: This screen can be used to easily program the weekly timer on the device. The screen gives a visual representation of the weekly timer, with all the 1 hour time slots visible. To change a timeslot, press on it, and then choose the mode you want to operate for that hour between.
SMART SCENES Smart Scenes is a powerful tool providing the option to customize the operation of the air heater based both on conditions within the room and outside influences. This gives the user the option of specifying much more intelligent actions. These are split into two categories Scene and Automation. SCENE Scene allows for a one touch button to be added to the Home Screen.
AUTOMATION Automation allows an automatic action to be set up for the device. This can be triggered by the Time, and a range of other influences, depending what other TUYA enabled devices you have on the network. 1. Press on the Scene tab at 2.
PROFILE TAB The profile tab gives you the option to edit both your detail, and use the added features of the unit. HOME MANAGEMENT Home Management proves options for managing your TUYA account, giving options such as adding a home, adding and removing rooms, and sharing devices with family.
MAINTENANCE CLEANING AND STORAGE ATTENTION: Please shut off the unit and unplug from the mains before cleaning or performing any maintenance. CLEANING THE SURFACE Clean the heater with a duster or a soft wet cloth. Do not use chemical solvents (such as benzene, alcohol or gasoline) as they may cause irreversible damage.
electriQ UK SUPPORT www.electriQ.co.uk/support Please, for your own convenience, make these simple checks before calling the service line. If the unit still fails to operate call: 0330 390 3061 or complete the online form 1. Is the unit plugged into the mains? 2.
PRODUCT FICHE HS10-600-0.6DGW, HS10-600-0.6WW, HS10-600-0.6LGW, HS10-600-0.6BW, VSTR9-650-0.6WW, VSTR9-650-0.6DGW, VSTR9-650-0.6BSW, HS17-600-1.2DGW, HS17-600-1.2LGW, HS17-600-1.2WW, HS17-600-1.2BW Item Symbol Value Unit Item Unit Heat Output Type of heat input, for electric storage local space heaters only (select one) Nominal heat manual heat charge control, with output integrated thermostat Minimal heat...
Page 30
VS6-1600-1LGW, VS6-1600-1WW, VS6-1600-1DGW, VS6-1600-1BW, VS4-1600-1DGW, VS4-1600-1LGW, VS4-1600-1WW, VS4-1600-1BW, VSTR12-1200-1DGW Item Symbol Value Unit Item Unit Heat Output Type of heat input, for electric storage local space heaters only (select one) Nominal heat manual heat charge control, with output integrated thermostat Minimal heat manual heat charge control with room output...
Page 31
VD4-1600-1.2DGW, VD4-1600-1.2WW, VD4-1600-1.2LGW, VD4-1600-1.2BW, VD6-1600-1.2DGW, VD6-1600-1.2WW, VD6-1600-1.2LGW, VD6-1600-1.2BW, HC26-400-1.2WW, HC26-400-1.2BW, HC18-400-1.2WW, HC18-400-1.2BW, VSM6-1800-1.2WW, VSM6-1800-1.2LGW, VSM6-1800-1.2DGW, VSM6-1800-1.2BW, VSTR32-1800-1.2WW Item Symbol Value Unit Item Unit Heat Output Type of heat input, for electric storage local space heaters only (select one) Nominal heat...