Table of Contents
Advertisement
REMOVING THE INTERIOR PARTS
When assembling, put fridge shelves in
the correct position and do not put them
CAUTION
upside down. It may cause a personal
injury or material damage.
When you put the shelves back , make
sure the side with the label "Rear" on it
face the rear of the refrigerator
Shelves
Gently lift up the shelves
with both hands and pull
it toward you. (Glass shelf)
Do not put the shelves upside down or
backwards.
CAUTION
There is a risk of falling.
Door guards
Firmly grab the door
guards with both hands
and lift it up gently to
remove the door guards.
Water tank may not be available
depending on the model.
Drawers
Pull the drawers out fully
then slightly lift it up to
remove the drawers.
• If the drawers get stuck to door, remove drawer
by lifting up after remove shelves.
CLEANING THE REFRIGERATOR
26_ operating
Do not use Benzene, Thinner or Clorox™
for cleaning.
WARNING
They may damage the surface of the
appliance and can create a risk of fire.
Do not spray the refrigerator with water
while it is plugged in, as it may cause
CAUTION
an electric shock. Do not clean the
refrigerator with benzene, thinner or car
detergent for risk of fire.
1. Unplug the power cord of the refrigerator.
2. Slightly dampen a soft lint-free cloth or paper
towel with water.
Do not use any kind of detergent to clean
the refrigerator because that can discolor
or damage the refrigerator.
3. Wipe the inside and outside of refrigerator until
it is clean and dry.
4. Plug the power cord of the refrigerator.
REPLACING THE LED LAMP
When the interior or exterior LED lamp has gone
out, do not disassemble the lamp cover and LED
lamp by yourself.
Please contact your service agents.
Advertisement
Table of Contents
