Care And Maintenance; Troubleshooting - Harbor Breeze FREEPORT LP8079LAZ Manual

CARE AND MAINTENANCE

When cleaning, use only a soft brush or lint-free cloth to avoid scratching the finish.
WARNING
Do not use water when cleaning the ceiling fan. It could damage the motor or the finish and
create the possibility of electrical shock.
RECOMMENDED: Periodically check that the fan motor unit screws, blade screws, support
housing and light kit screws are tight and secure.
Do not install or use fan if any part is damaged or missing.

TROUBLESHOOTING

PROBLEM
Fan will not start.
Fan sounds noisy.
POSSIBLE CAUSE
1. Fuse or circuit breaker blown.
2. Loose power line connections to the
fan, or loose switch wire connections
in the switch housing assembly.
3. Reversing switch in neutral position.
1. Blades not attached to fan.
2. Loose screws in motor housing.
3. Screws securing fan blade holders to
motor hub are loose.
4. Wire connectors inside housing are
rattling.
CORRECTIVE ACTION
1. Check main and branch circuit
fuses or circuit breakers.
2. Check line wire connections to
fan and switch wire connections
in the switch housings.
3. Make sure reversing switch
position is all the way to one
side.
Make sure main power is turned
off!
1. Attach blades to fan before
operating.
2. Check to make sure all screws
3. Check to make sure the screws
4. Check to make sure wire
Make sure main power is turned
off!
17
WARNING
in motor housing are snug
(do not overtighten).
that attach the fan blade
holders to the motor hub are tight.
connectors in switch housing
are not rattling against each
other or against the interior wall
of the switch housing.
WARNING
Lowes.com/harborbreeze