Advertisement
DROP IN SIDE BURNER
Premium #304 grade stainless steel or Matt black finish
Flame Failure Device (FFD) for added safety
Electronic ignition
Convenient lid gives you extra bench space
when not in use
Stainless steel burner
Supplied fully assembled
Gas Certified to Australian Standards
Suitable for Natural Gas conversion
LCC27 REGULATOR SUPPLIED
(LPG MODELS ONLY)
This LCC27 Regulator can only be used with
the new safer industry standard LCC27 Gas
Cylinder Connection.
FOR OUTDOOR USE ONLY
WARNING:
Improper installation, adjustment, alteration, service or
maintenance can cause injury or property damage.
Read the instructions thoroughly before installing or
servicing this equipment.
WARNING! DO NOT USE AN ADAPTOR ON THE
CYLINDER CONNECTION
PHOENIX
Stainless Steel Model NO. BQ2027, BQ2027NG,
Black Model NO. BQ2027BL, BQ2027BLNG
Important: Retain these instructions for future use.
Gasmate® is a registered trademark of
Sitro Group Australia Pty Ltd www.gasmate.com.au
Aber Living, N.Z. www.gasmate.co.nz
FOR YOUR SAFETY
If you smell gas:
1. Shut off the gas to the appliance.
2. Extinguish any open flame.
3. If odour continues, immediately call
your gas supplier.
Do not store or use gasoline or other flammable vapour
and liquids in the vicinity of this or any other appliance.
04579 03/23
Advertisement
Table of Contents
Related Manuals for Gasmate PHOENIX BQ2027
Summary of Contents for Gasmate PHOENIX BQ2027
- Page 1 WARNING! DO NOT USE AN ADAPTOR ON THE and liquids in the vicinity of this or any other appliance. CYLINDER CONNECTION Important: Retain these instructions for future use. Gasmate® is a registered trademark of 04579 03/23 Sitro Group Australia Pty Ltd www.gasmate.com.au Aber Living, N.Z. www.gasmate.co.nz...
-
Page 2: General Information
GENERAL INFORMATION before checking to ensure the burner tubes are fully seated over gas valve orifices. WARNING materials and the gas cylinder clear of any heat source. • Never lean over cooking surface when lighting. Failure to comply with these instructions could result When changing over from an empty gas cylinder to a •... -
Page 3: General Assembly
GENERAL ASSEMBLY Burner Operation & Ignition System Check 1. Open the Lid of the barbecue before attempting to IMPORTANT Connecting & Disconnecting to the Gas Source LCC27 Cylinder light the burner. Familiarise yourself with the general information and Connection Device 2. -
Page 4: Care And Maintenance
CARE & MAINTENANCE Location of your Barbecue General Cleaning of Painted Surface DO NOT use your barbecue in garages, porches, sheds, When cleaning your BBQ use a mild dish soap combined breezeways, or other enclosed areas. Your barbecue is to with warm water and a microfiber cloth to clean the WARNING Care &... -
Page 5: Product Dimensions
CARE AND CLEANING OF PRODUCT DIMENSIONS After cleaning applying a thin coating of ‘light oil’, for example baby oil, will also help protect the stainless steel STAINLESS STEEL surface from the elements. Stainless steel parts of this appliance are made from 304 Stubborn Stains and Corrosion Spots &... -
Page 6: Natural Gas Conversion
NATURAL GAS CONVERSION SAFE APPLIANCE LOCATIONS Within a partial enclosure that includes an overhead cover and no more than two walls This appliance shall only be used in an above ground (see Example 2 & 3). Conversion ONLY to be done by an authorised person. open-air situation with natural ventilation, without Within a partial enclosure that includes an overhead stagnant areas, where gas leakage and products of... - Page 7 For any queries or assistance call Customer Service (Australia Only) 1300 174 876 Hours of operation: Monday to Friday 8am - 5pm EST Do not return to place of purchase. Keep your purchase receipt, this will be required to make any claims under the 5 year warranty.
Need help?
Do you have a question about the PHOENIX BQ2027 and is the answer not in the manual?
Questions and answers