Bushnell 119522C Instruction Manual page 13

CAMERA OPERATION (continued)
• After mounting the camera, open the front housing and slide
the Power switch to the "ON" position. Press the SETUP button if
necessary to enter the Setup Menu.
• The PIR indicator light below the lens will blink when you have
entered the coverage area.
• Adjust the camera position as needed and repeat the test until the
desired coverage area is achieved.
Press the SETUP button again when you are finished using the test
•
mode-the camera will be "sleeping" and waiting for the PIR sensor to
trigger the first photo or video capture.
4. Secure the Camera
A standard padlock may be used in the camera's lock hole to secure it and
prevent theft.
13