Bushnell 119522C Instruction Manual page 11

Digital land camera w/night vision
Table of Contents

Advertisement

Available languages

Available languages

Menu Item
Mode
Format
Duty
(this sets the
"Overwrite"
feature)
Settings
(Bold=default)
2M, 6M (with
Mode set to
1P or 3P for
photos),
5-60 Sec (in
Movie (video)
mode)
FO/NO,
Y/N
Y/N
(NOTE: setting
to "Y" not
recommended
when using SD
cards of 16GB or
higher capacity)
Description
Select "Mode" and press OK. Use
UP/DOWN to select 1P (single
photo), 3P (burst of 3 photos), or
Movie (video mode). Press OK. Use
UP/DOWN to set LO (2MP) or HI
(6MP) still photo resolution (High
resolution provides higher quality
photos, low resolution allows you
to store more photos on the SD
card), or video length from 5-60 sec.
(if video mode was selected).
Deletes (erases) all files stored
on a card to prepare it for reuse.
Always format a card that has been
previously used in other devices.
Caution! Make sure you have
downloaded and backed up any
files on the card that you want to
preserve first! Press UP to select
"FO", press OK, then select "Y" (Yes)
and press OK again to confirm you
want to format the card. The extra
step and "No" defaults help prevent
accidental erasure of all your
photos/videos.
Press DOWN after Format to select
"Duty". Setting window reads "OVR".
Press OK. Select "Y" (Yes) if you want
the oldest photos/videos to be
replaced by new images once the
SD card is full. Select "N" (No), and
recording will stop when the card is
full. Press OK.
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

119522cn119522cl

Table of Contents