Cooking In One Stage; Cooking In Two Stages - Magic Chef MCG1310AW Use And Care Instruction Manual And Cooking Manual

MCG1310AW,AB(¿ )-HDUS 2002.12.20 5:56 PM ˘ ` 11

COOKING IN ONE STAGE

M/W
X 6
2. Touch the time set pads for the cooking time.
3. Touch START pad.
When you touch START pad, the M/W indicator starts blinking to show the oven is cooking.
The display counts down the time to show how much cooking time is left. When the cooking time ends, you
will hear 3 beeps.
NOTE: Using lower power levels increases the cooking time which is recommended for foods such
as cheese, milk and slow cooking of meats.

COOKING IN TWO STAGES

All recipes require frozen foods to be defrosted fully before cooking.
This oven can be programmed to automatically defrost foods before cooking.
Defrost
2. Touch the time set pads for the defrosting time you
want.
M/W
X 6
4. Touch the time set pads for the desired cooking time.
5. Touch START pad.
When you touch START pad, the Def. and M/W indicators come on to confirm the power levels
selected. The Def. indicator starts blinking to show you that the oven is in DEFROST mode.
The display counts down the time remaining in DEFROST mode. When the oven beeps, turn over,break
apart and/or redistribute the food. At the end of DEFROST mode, the oven will beep and start M/W cook.
The Def. indicator goes off and the M/W indicator starts blinking. The display counts down the time
remaining in M/W mode. When M/W cook ends, you will hear 3 beeps.
1. Touch M/W pad.
(Select the desired power
level.)
1. Touch Defrost pad.
3.Touch M/W pad.
(Select the desired power level. )
The M/W indicator lights.
The display will show what you touched.
This example shows power level 5.
Note : If step 1 is omitted, the oven will
cook at full power.
The display will show what you touched.
Note : Your oven can be programmed for
99 minutes 99 seconds. ( 99 : 99 )
The Def. indicator lights and " : 0" is displayed.
The display will show what you touched.
The M/W indicator lights and "P-HI" is displayed.
The display will show what you touched.
This example shows power level 5.
The display will show what you touched.
11