Asko W2086X.UK Instructions For Use Manual page 26

Pausing, stopping or changing the program
Stop program
To stop the washing program, press and hold for 3 seconds button Start/Pause.
Use the button 1 to choose "Stop program". The program is canceled and the water is pumped out of the
machine if necessary. Only then will you be able to open the washing machine door. Use the Program
selector knob to select a new program. If necessary, add detergent, and then press the Start/Pause button.
If the temperature in the drum is very high, then cooling procedure starts before program is canceled.
A washing program can be paused by pressing the ON/OFF button.
The washing machine will switch off .
After the washing machine is switched on, press the Start button to resume the program.
Do not open the detergent compartment while the appliance is operating.
In some cases the door may be locked although no program is in progress (e.g. in case of an error). To
unlock the door, press the Start/Pause button and hold it for a while.
26
Paused
1
To pause the program, shortly press the
Add clothes
Start/Pause button.
To resume a program, press the Start/
Pause button again.