❖ The hob must be ventilated properly. The air inlet (D) and outlet (E) must never
be blocked or covered (s. fig. below). Always keep the appliance in proper
condition.
M
INIMUM DISTANCES REQUIRED FOR PROPER VENTILATION
A
W
ALL CUPBOARD
➢ min. 450 mm
Extractor hood
➢ min. 650 mm
❖ The top closing edge of the cabinet (1) must not be flush with the installation
opening (2). Install the closing edge in offset positioning (1) or bevel the closing
edge (3).
C = V
ENTILATION SLOT
B
min. 50 mm
/ E = A
IR OUTLET
C
min. 20 mm
49
D
Air inlet
min. 5 mm
:
E