Advertisement
Inter
nal Drying
1. When power off , the fan will continue to operate for 10 seconds at high fan speed to
dry out the internal moisture for anti-mildew purpose . At this moment , the
light"DEFORST" will light up. That's mean the internal drying function is in progress.
Back Cover (Pre-filter)
1. Except the pre-filter , heavy dust may also trapped around the rear panel. It is suggested to
clean the rear panel bi-weekly .
2. Take off the back cover and vacuum the rear panel gently to remove heavy dust.
Water Tank
Water tank lid Water tank lid
Main Body
It is recommended to clean the main body of dehumidifer regularly.
1. Unplug the power plug before cleaning.
2. Use wet soft cloth or mild detergent to wipe the dehumidifier and followed by a dry cloth.
3. If the dehumidifier will not be used for a long time , it is recommended to unplug, clean and
wrap the machine and store it in a dry place without sunlight.
CAUTION
• Boiling water, eradicator, acid or alkaline detergent, soap, abrasive powder, gasoline, thinner,
alcohol, benzene organic solution and brush are not allowed to use for cleaning.
•
Do not rinse clean with water spray.
1.
After each use of dehumidifier, empty the
water tank.
2. R
emove the water tank lid and dry the water
tank by using a soft cloth.
3.
Return the water tank lid and place the water tank
its position.
back to
Care and Maintenance
43
Advertisement
