KROM 21 Owner's Manual page 8

Table 4. Input fields and buttons on the tab Measurement.
Name
Comment to measurement – Text input field
Number of seconds to measure – Drop down list
Measure
Monitor signals
Figure 2. A comment about the measure-
ment can be entered in the second tab.
Field voltage is entered here.
Comment
Specific information regarding this
measurement, for example the field current or
terminal voltage. Example: 6 kV
The length of the recording. Values between 3
and 10 seconds are available. Select a value that
gives approximately six turns of the generator.
Starts a recording of the magnetic flux for the
selected number of seconds.
Displays the signals live on the screen. The
monitoring is performed at 1 kHz. The optical
8