Table of Contents
Advertisement
measurement are also stored in the data file. It is possible to modify the information after the measure-
ment has been performed. Date and time can not be modified.
KROM is a data collection system but it also provides a way to monitor the signals before a measure-
ment is started to verify the health of the sensors.
4.1 Unit tab
Information regarding the unit is entered in the first tab.
Table 3. Input fields in the Unit tab.
Field name
Station
Unit
Unit comment
Number of poles
4.2 Measurement tab
Information specific to the measurement, for example the field current or terminal voltage, is entered
in the second tab. It is from this tab a measurement recording is started. The Monitor signals button
starts the monitoring of the signals without starting a recording.
Figure 1. Data about the unit are entered
in the first tab.
Comment
The power station name
Example: G1
Here you can enter information regarding the
unit.
Example: Old poles
This number must be entered to correctly to
create an accurate plot of the measurement.
7
Advertisement
Table of Contents
