Table of Contents
Advertisement
Operating instructions
Connecting the QCast Mirror to your
projector
Note
Depending on your device's operating system, different installation procedures and setup are
required. Read this document and on-screen instructions (if provided) carefully.
1. Connect the USB-C-to-USB-A cable to the USB-C port on the dongle.
2. Plug the dongle into the HDMI port on the projector.
Note
If the space around the ports on the projector is too tight to plug the dongle, you can use the HDMI
adapter cable included in the package to connect the dongle.
7
USB-C
HDMI
Advertisement
Table of Contents
