Test Modes - Samsung WF45M5500A Series Service Manual

4-2. TEST MODES

No Mode
1 Smart Install
Automatic
2
check mode
Manual check
3
mode
S/W version
4
Check
Diagnostic Code
5
Check
Automatic Mode of Smart Install
▪ Automatically start all operation modes of Smart Install.
Manual Mode of Smart Install
▪ Under the condition of manual mode, every time when "Delay End" is pressed, next step will be entered.
▪ Contents like washings, etc. are not allowed in the drum.
1 carry out test for machine door locking
carry out test for drainage pump
2
operation
carry out test for operation of
3
preparatory valve
Co carry out test for operation of cold water valve
Ho carry out test for operation of hot water valve
carry out test for operation of water shot valve
6 carry out test for operation of washing heater
carry out test for operation of rinsing
※ Accessories not included in the product are not require to check and they can be skipped directly.
Identity of Smart Install completion
▪ After Smart Install is completed normally, 『OK(Ot)』 identity will display.
▪ If Smart Install is completed abnormally or Smart Install fails to work, 『nG』identity will display.
Result Enquiry of Automatic Mode of Smart Install
▪ Under the condition of appearance of『AS』 identity, press "Delay End + Start/Pause" button.
▪ If automatic mode result is in normal condition, 『OK(Ot) identity will display.
If automatic checking mode fails to complete normally or fails to execute, 『nG』 identity will appear.
Diagnosis Information Display Mode
▪ Under the condition of appearance of 『AS』 identity, if the first button on the right at the bottom is pressed, 『CR』
identity will appear and diagnosis information display mode is entered.
▪ Under the condition of appearance of 『CR』 identity, of turn the jog dial control switch clockwise, diagnosis codes gen-
erated before will display 7 digits at most.
24 _ Troubleshooting
Set the scheduled
Standby
Smart Install
Enter Smart Install
Enter Smart Install
Enter Smart Install
For models that do not feature the jog dial, press the 3rd button
How to enter
Press Start/Pause
for 7 seconds
time to 17:00
Press Start/pause While displaying "AS".
Press Delay End While displaying "AS" delay end,
Check devices in turn when pressing delay end.
Press the first button on the left at the bottom
While displaying "AS".
Press the first button on the right at the bottom while
displaying "AS", "Cr". Tum jog dial along the direction for
CW when displaying.
from the bottom left to display the information codes
one by one by one with the latest first.
7 carry out test for operation of drainage pump
8 carry out test for operation of dehydration
carry out test for operation of drying heater and
9
drying fan
10 carry out test for operation of machine door
Automatic mode of Smart Install is completed
OK(Ot)
normally
Smart Install