Electrolux EI33AR80WS Use & Care Manual page 17

WATER SUPPLY CONNECTION
5. With the steel clamp and screw, secure
the water supply line (copper tubing
only) to the rear panel of refrigerator
as shown.
6. Coil the excess water supply line
(copper tubing only), about 2½ turns,
behind refrigerator as shown and
arrange coils so they do not vibrate or
wear against any other surface.
7. Turn ON the water supply at shutoff
valve and tighten any connections
that leak.
8. Reconnect the appliance to electrical
power source.
(SOME MODELS)

NOTE
Check with your local building authority for
recommendations on water lines and asso-
ciated materials prior to installing your new
refrigerator. Depending on your local/state
building codes, we recommend for homes
with existing valves, Smart Choice® water
line kit 5304437642 (with a 6' Stainless
Steel Water Line) and for homes without
an existing valve, we recommend Smart
Choice® water line kit 5305510264 (with
a 20' copper water line with self-tapping
saddle valve). Please refer to
Electrolux.com for more information.
17