End Time; Clock; Childproof Lock - Siemens Fornuis HX74W536N Instruction Manual

End time

You can change the time at which you wish your dish to be
ready. The oven starts automatically and finishes at the desired
time. You can, for example, put your dish in the cooking
compartment in the morning and set the cooking time so that it
is ready at lunch time.
Ensure that food is not left in the cooking compartment for too
long as it may spoil.
Example in the picture: it is 10:30 am, the cooking time is
45 minutes and the oven is required to finish cooking at
12:30 pm.
Adjust the function selector.
1.
Set the temperature selector.
2.
Press the 0 button twice.
3.
Use the @ or A button to set the cooking time.
4.
Press the button.
0
5.
The N arrow is next to y
ready is displayed.
Use the or button to set a later end time.
@ A
6.
After a few seconds, the oven adopts the settings and switches
to standby position. The display shows the time at which the
dish will be ready and the
The and symbols go out. When the oven starts, the
V 0
cooking time counts down in the display and the
next to the symbol. The
x

Childproof lock

The oven includes a childproof lock to prevent it being turned
on accidentally.
The oven does not react to any setting. The timer and time can
be programmed when the childproof lock is on.
When the heating type and temperature or grill level are
programmed, the childproof lock turns off the heating.
Activating the childproof lock
No cooking time or end time should already be set.
Press the button for approximately four seconds.
h
The display panel shows the
now activated.
. The time when the dish will be
arrow is next to the symbol.
N y
arrow is
N
symbol goes out.
y
symbol. The childproof lock is
@
The cooking time has elapsed
A signal sounds. The oven stops heating. 0:00 is shown in the
display. Press the button. You can set a new cooking time
0
using the or button. Or press the
@ A
the function selector to the off position. The oven switches off.
Changing the end time
Use the or button to change the end time. After a few
@ A
seconds, the change is adopted. If the timer has been set, first
press the button twice. Do not change the end time if the
0
cooking time has already started to elapse. The cooking result
would no longer be correct.
Cancelling the end time
Use the button to reset the end time to the current time. After
A
a few seconds, the change is adopted. The oven starts. If the
timer has been set, first press the
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The time-setting options symbol is in
the foreground and preceded by the
To call up the timer,
V x
clock, press the button repeatedly until the
0
to the relevant symbol. The display shows the value for a few
seconds.

Clock

After connecting the appliance to the mains or after a power
cut, the symbol and three zeros flash in the display. Set the
0
clock.
Press the button.
0
1.
The clock in the display shows 12:00. The time symbols light
up and the N arrow is next to
Use the or button to set the clock.
@ A
2.
After a few seconds, the time that has been set is adopted.
Changing the clock
No other time-setting option should have been set.
Press the button four times.
0
1.
The time symbols light up in the display and the
next to .
0
Use the @ or A button to change the clock.
2.
After a few seconds, the time that has been set is adopted.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.
Turning off the childproof lock
Press the button for approximately four seconds.
h
The symbol on the display panel goes off. The childproof
@
lock is now deactivated.
button twice and turn
0
button twice.
0
arrow.
N
cooking time, end time or
y
arrow is next
N
0 .
N arrow is
0
17