Table of Contents
Advertisement
TV-Viewing Support Functions
Use the functions that are supported by digital or analogue channels.
Changing the broadcast signal
Live TV
Channel List
Press the right directional button on your remote control, move the focus to Terrestrial, Cable, or Satellite, and then
press the Select button.
"
You do not need to use this function if your TV is connected to a cable box or satellite box.
"
The
Channel List
categories may vary depending on the incoming broadcast signals.
Scanning for available channels
Settings
"
This function may not be supported depending on the model or geographical area.
"
If the TV is connected to a cable box or satellite box, you do not need to do this.
"
The DVB-T2 system may not be supported depending on the geographical area.
"
The
Auto Tuning Settings
Checking digital channel signal info and strength
Settings
"
If your TV is attached to a separate, over-the-air antenna, you can use the signal strength information to adjust the antenna
for increased signal strength and improved HD channel reception.
"
Signal Information
"
This function may not be supported depending on the model or geographical area.
Broadcasting
(Auto Tuning
may not appear depending on the model or geographical area.
Support
Self Diagnosis
is only available for digital channels.
Settings)
Auto Tuning
Signal Information
- 97 -
Try Now
Advertisement
Table of Contents
