Table of Contents
Advertisement
Running the Accessibility menu functions using the General menu
Settings
You can also go to the
Accessibility
change the speed of Voice Guide.
The TV will not verbalise this menu unless
1.
Press the
button.
2.
Press the left directional button until you reach
3.
Press the Select button to open the TV's
4.
Press the down directional button to reach General, and then press the Select button to open this menu.
5.
Use the directional buttons to go to the
menu.
6.
The menu will appear with
press the Select button.
7.
A menu appears with the options to change
8.
Select the menu using the directional buttons, and then press the Select button.
Running the Accessibility menu functions using Bixby
To use Bixby, the TV must be set up and tuned and must be connected to the Internet. You can connect the TV to the
Internet during the initial setup or do it later through the settings menu.
There are many commands you can say to control the TV. These can be used together with
voice input and voice output. You can use the Samsung Smart Remote but the TV must be connected to the Internet.
To speak a command, press and hold the
below the LED power indicator and above the directional button) and say the command, and then release the
button. The TV will confirm the command.
General
Accessibility
menu from the TV settings menu. This provides more options, for example, to
Voice Guide
Settings
Accessibility
Voice Guide Settings
button (located near the top of the Samsung Smart Remote, directly
is already turned on.
Settings.
menu.
menu, and then press the Select button to open this
as the first selection. Highlight
Voice Guide
and Volume, Speed, Pitch.
- 174 -
Voice Guide
Settings, and then
Voice Guide
to give you
Advertisement
Table of Contents
