Tips - Breville Super Q Pro Instruction Book

Table of Contents

Advertisement

Available languages

Available languages

Tips

• The inner measuring cap can be removed to
add oils/liquids or other ingredients during
blending. Extreme care must be taken as
depending on the mixture volume and speeds
of operation, splashes can eject from the lid.
We do not recommend removing the inner
measuring cap when blending hot liquid.
• Do not exceed the maximum mark when
adding foods and liquids into the blender.
• Run the blender only for the appropriate
amount of time required – do not over
blend ingredients.
• Use the PULSE | ICE CRUSH button
when food is too thick or coarse to
circulate within the blender jug.
• The scraper and tamper accessories can
be used during blending by removing
the inner measuring cap. Always make
sure the main lid stays firmly in place.
• Ingredients may stick to the sides of
the blender jug. To push food back
onto the blades with the main lid on
(inner cap removed), use the tamper
provided to scrape down the sides of
the jug, and continue blending.
• If any moisture or liquid spills on top of
the motor base during blending, turn the
blender off and unplug from the outlet.
Remove the blender jug, and wipe motor base
immediately with a dry cloth or paper towel.
• The optimum amount of ice cubes that the
blender can process in the jug is 8 ounces
(225g). That's approximately 10 ice cubes.
• When the blender has been running for
6 minutes in manual mode with the jug it will
automatically turn off. This is a safety
feature to protect the motor.
• Thicker mixtures puree more efficiently
if the jug is ¼ to ½ full.
• Do not use metal utensils, as they may
damage the blades or blender jug.
12
• Dates and other dried fruits may vary in
hardness and moisture content. If adding
dried fruits to smoothies, use the tamper for
the first 15–20 seconds of the SMOOTHIE
setting.
• To make nut milks, add 1–2 cups of raw
or soaked/drained nuts. Add 3–4 cups of
purified water, and process on MILL for 1
minute. Strain through a nut milk bag (or
muslin/cheesecloth) over a large bowl or jug.
Close bag and squeeze the pulp in the bag
to extract as much milk as you can.
• To soak or not to soak nuts? This is a personal
preference and you can make nut milks with
unsoaked or soaked almonds. Almonds are a
great source of protein however they contain
a naturally occurring compound that may
prevent our enzymes from digesting the
nuts effectively. Try soaking nuts overnight
to help break down the compound. Always
rinse and drain soaked nuts before use.
• Roasting nuts to make nut butter allows their
natural oils to be released during blending,
and enriches the flavor. Some nuts, such
as almonds and hazelnuts, have a lower
oil content. Add rice bran, macadamia or
coconut oil when blending, if needed.
• Freshly milled whole grain flour does
not keep as long as commercial flours.
This is because the inner layers of the
grain contain rich oils, which can become
rancid over time with exposure to heat
and moisture. Always store your flour in
an airtight container in a cool, dry place.
Flour can be stored in the refrigerator
or freezer in warm/humid climates.
• Corn, soy beans and some other dried
legumes and grains vary in their moisture
content, and may not circulate properly
during milling. Use the scraper or tamper
during milling to assist with circulation.
• To remove any food that cannot easily be
scraped out from under the blades, replace lid
and turn blender back on high speed for 4–5
seconds to spin foods out from under blades.

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Cbl920

Table of Contents