Notice
If you leave a key inserted when riding or
transporting the pedelec, it may break off or the
locking system may open accidentally.
Remove the key from the battery lock
immediately after use.
We recommend that you attach the key to a
key ring.
Switch off the battery and the drive system before
removing or inserting the battery.
6.9.1
Frame battery
Only applies to pedelecs with this equipment
6.9.1.1 Removing the frame battery
(1)
(2)
Figure 67: Removing and inserting the frame battery
(1) Open the lock with the key.
Tip the battery out of the top mount.
(2) Pull the battery out of the mount.
6.9.1.2 Inserting the frame battery
(3) Place the battery on the contacts in its
lower mount.
(4) Remove the key from the lock.
Tip the battery into the top mount as far as it
will go.
There is an audible clicking noise.
Check the battery to make sure it is firmly in
place.
MY20B01-22_1.0_21.06.2019
6.9.2
Pannier rack battery
Only applies to pedelecs with this equipment
6.9.2.1 Removing the pannier rack battery
(1)
Figure 68: Removing (2) and inserting (3) the pannier rack
battery
(1) Open the battery lock with the key.
(2) Pull the pannier rack battery backwards and
out of its mount.
(3)
Remove the key from the lock.
6.9.2.2 Inserting the pannier rack battery
(3) Insert the pannier rack battery into its mount
with the contacts facing the front until it clicks
(4)
into place.
Check battery to make sure it is firmly in place.
6.9.3
Integrated battery
Only applies to pedelecs with this equipment
6.9.3.1 Removing the integrated battery
(1)
Figure 69: Removing the integrated battery
Operation
(3)
(2)
(2)
(3)
(4)
75