Honda WAVE100 Owner's Manual page 62

Place your motorcycle on its centre stand
3.
on a firm, level surface.
Place a drain pan under the drain bolt.
4.
Remove the oil fill cap/dipstick, drain bolt
5.
and sealing washer to drain the oil.
Discard the oil at an approved
u
recycling centre.
Drain bolt Sealing washer
Engine Oil
Install a new sealing washer onto the
6.
drain bolt. Tighten the drain bolt.
Torque: 24 N·m (2.4 kgf·m, 18 lbf·ft)
Fill the crankcase with the recommended
7.
oil ( P. 40, P. 99) and install the oil fill
2 2
cap/dipstick.
Required oil
When changing oil:
0.7 L (0.7 US qt, 0.6 Imp qt)
Check the oil level.
8.
Check that there are no oil leaks.
9.
Changing Engine Oil
u
P. 55
2
57