CAUTION! Keep this device away from rain and moisture Unplug mains lead before opening the housing For your own safety, please read this user manual carefully before you initially start-up Every person involved with installation. operation and maintenance of this fixture has to - be qualified - follow the instruction of this manual - consider this manual to be part of the total product...
the device must be take out of operation, disconnected and then be cleaned with a dry cloth, Dust can reduce the insulation which may lead to mortal electrical shock. More severe dirt in and at the device should only be removed by a specialist. There must never enter any liquid into power outlets, extension cords or any holes in the housing of the device.
DESCRIPTION OF THE DEVICE Features > 150W warm white COB LED > Color temperature adjustable and customized: 2700k - 7000K > 2 CH channel in option > Beam angle:20degree > Variable electronic dimmer (0-100%) > Variable electronic strobe > LED operation menu with function buttons >...
The earth has to be connected. The device must only be connected with an electric installation carried out in compliance with IEC standards. OPERATION After you connected the effect to the mains, The fixture starts running Stand Alone operation In the stand alone mode, the fixture can be use without controller Master/slave-operation The master/slave-operation enables that several devices can be synchronized and controlled by one master-device...
Master/slave mode .This mode will allow you to link up 32 units together without a controller. .Use standard DMX cables to daisy chain your units together via the DMX connector on the rear of the units. Proper performance it may be necessary to use a terminator at the last fixture. DM X- pr ot o col Channel Value Function...