Adjusting The Display Image - Lenovo L27e-40 User Manual

Adjusting the Display Image

This section describes the functions of the user controls used to adjust the display image.
Using Direct Access Controls
When On Screen Display (OSD) is not displayed, you can use direct access controls.
Icon Control
Power
Menu/OK
Right
Left
Up
Down
Source-
selecting
Chapter 2. Adjusting and Using the Display 2-3
Press to turn On/Off the monitor.
Press to open main menu while there is no OSD on the screen；
Press to enter next level on main menu or sub menu , or move backwards
through the sub menus;
Press and hold for 10 seconds to Lock/un-Lock all menu.
It is a shortcut for adjusting Volume（HDMI）or Processing Please
wait（VGA） while there is no OSD on the screen ;
Press to enter sub menu;
Press to increase current values on adjustment bar.
It is a shortcut for adjusting Volume（HDMI） or Processing Please
wait（VGA） while there is no OSD on the screen;
Press to move backwards through the sub menus;
Press to decrease current values on adjustment bar.
Press to move lighting-indicator on main menu up to last one;
Press to Brightness shortcut key.
Press to move lighting-indicator on main menu down to next one;
•
Press to Brightness shortcut key.
It is a shortcut for changing input signal while there is no OSD on the
screen or on power-saving mode;
Press and hold for 10 seconds to Enable/Disable the "DDC/CI" .
Description