Adjusting The Display Image - Lenovo ThinkVision S27i-30 User Manual

Adjusting the Display Image

This section describes the functions of the user controls used to adjust the display image.
Using Direct Access Controls
When On Screen Display (OSD) is not displayed, you can use direct access controls.
Icon Control
Power
Menu/Confirm
Right
Left
Up
Down
Signal source
selection
Chapter 2. Adjusting and Using the Display 2-3
Description
Power on / off
Open the OSD Menu
Enter the next level menu.
Press and hold for 10s to lock or unlock the menu.
Perform the corresponding shortcut function set in the OSD menu Quick
Settings.
In the OSD menu, enter the next level menu.
When OSD menu is opened, it serves as a return/exit
Perform the corresponding shortcut functions set in the OSD menu Quick
Settings.
When OSD menu is opened, it serves to move the cursor upwards.
In the adjustment bar, it acts as a value increase
Perform the corresponding shortcut functions set in the OSD menu Quick
Settings.
When OSD menu is opened, it serves to move the cursor downwards.
In the adjustment bar, it acts as a value reduction
Signal Source Selection Shortcut Keys
Press and hold for 10 seconds to enable or disable the DDC-CI function