Section One: Assembly Instructions - Traeger CAN400.01 Owner's Manual

READ THE MANUAL BEFORE OPERATING

SECTION ONE: ASSEMBLY INSTRUCTIONS

INTRODUCTION
Congratulations on your purchase of this Traeger Wood Pellet Grill, Model CAN400.01.
With proper set-up, operation and maintenance, the Grill will provide you with delicious food
and with years of cooking enjoyment.
Assembly of the grill is required. Follow the assembly instruction provided in the
CAN400.01 packaging. Removal of the Porcelain Grills, Drip Pan, Heat Baffle, and Grease
Bucket will be required for initial firing and whenever the Grill runs out of pellets along with
periodic maintenance. Here are the instructions on removal and replacement for these
items.
Removal Instructions:
Open the Lid on CAN400.01.
Remove the Porcelain Grills (3 pieces) and set aside. Remove middle porcelain grill first.
Remove the Drip Pan and set aside.
Remove the Heat baffle from the holders and set aside.
Open the right lower door and take the grease Bucket from the Drain hook and set aside.
Installation instructions:
Insert the heat baffle into the fire box aligning the notches in the heat baffle with the cutouts
in the baffle supports. (See figure A)
FIGURE A