Garden Treasures PG202H Manual page 12

ASSEMBLY INSTRUCTIONS
13. To install the battery (FF), unscrew the igniter
cap preassembled to burner assembly (B).
Insert battery (FF) into the igniter, ensuring the
positive "+" end faces outward. Replace the
igniter cap.
14. Connect the
assembly from burner assembly (B) to a
20-lb. LP-gas cylinder (sold separately).
Line up threads on cylinder fitting with those
on regulator and rotate clockwise until tight.
HAND TIGHTEN ONLY . DO NOT USE ANY HAND
TOOLS TO MAKE THIS CONNECTION. Be
careful not to cross threads when screwing in
fitting.
To disconnect the LP-gas cylinder, first
make sure the cylinder valve is in the "OFF"
position. Then, turn the knob on the
regulator assembly counterclockwise until it
is loose.
Warning
Before connecting, be sure there is no
debris caught in the head of the LP-gas
cylinder regulator valve or in the head of the
burner and burner ports.
Check for leaks after connecting the gas
cylinder every time according to the
"Checking for Leaks" section.
preassembled regulator
13
14
9,07kg
30,98 cm
12
FF
FF
-
+
B
B
Igniter
igniter
M
45,46 cm